NEW WAY OF DISTRESSING!

I have been distressing some furniture here lately, coffee tables, rockers, glider rockers and end tables.  For the most part, I have used the same process for all of them, sanding, painting with a flat paint, wiping it down and then sealing them with a linseed oil because I wanted it to have a sealer on them but didn't want it to be shiny cause I wanted it to have a farmhouse old use look.  Well I tried this on a glider rocker that I had painted and it went horribly wrong.  What happened, you ask?

Well I tried doing the same process but I wanted to use a glossy paint so this glider rocker would be a little different and all the furniture wouldn't look the same.

This was the chair before I started working on it.  It was just a typical glider rocker that I had from when the kids where born.  It had blue cushions.

I didn't take a picture of the mess I made, I guess I should have but I was frustrated and didn't think about it.  The process was, I sanded it so the paint would adhere to it.  I wiped it down with a soft cloth and then used 2 cans of glossy black paint from Lowes.  Their generic brand .99 each.  Once I did this I used a sheet of the bendable sand paper and distressed it.  It looked pretty good so I then decided to add the linseed oil.  Big Mistake! I'm guessing where the glossy has a sealer or shinny consistency it wouldn't let the oil soak into the wood.  It was sticky!!!  I mean like GUM! Yuck!

It reminds me of the trick where u put nasty stuff on a pair of binoculars and leave it for a person to give them raccoon eyes, buhahaha! Let someone sit in this chair and get up with stripes.. LOL

Anyways, I said well gotta go back to the drawing board.  So I bought a can of Acetone from Lowes. 

I took a old wash cloth and started wiping down the chair to get the gummy mess off.  The more I wiped the more I liked the way the wood was looking old.  So I wiped and wiped it. Once I took most of the sticky off I sanded over it a little and then resprayed in a few places where it took off to much.  I ended up really liking the way it looked in the end so I didn't go back with any flat paint.  I never thought about painting it and then using acetone to strip it down to give it a distressed look.  

I puchased painters slip covers from Walmart.  They are around 17 each and I have used them to cover 3 different chair projects.  So I spent around 15 bucks on this project.  

This is a couple of pictures of other projects that I distressed earlier, but I did it the other way that I mentioned at the top.  I used flat paint and used the linseed oil to seal them.  I liked the way they turned out also.  These are the supplies I used for most of the projects.

First before and after is a end table I have had for years. 

 Sanded and ready for paint

Sanded after paint

 Coat of flat black on top and then sanded to distress.

 

This is the finished product.  You can see the arm of the lazy boy chair that was teal blue, yes teal that I recovered with the painters slip cloth that come from Walmart that I mentioned above. 

Another Project is my moms rocker that she rocked us in as baby's.  I wanted to incorporate that in my projects because it was Green... 

 This is when I started it. I had already sanded right much on it by the time I remembered to take a picture.  

I had painted it flat black and sanded it down, then painted it again.  

This chair had some old cushions, I also recovered those with slip cloth. This slip cloth has covered everything and it was only 17 Bucks!

` 

DISTRESS ON THE CHEAP! 5 BUCKS FOR MY TABLE!

I have really enjoyed doing all these house projects because it helps put my brain in the place of happiness..... Yes my kids and hubby do that but sometimes you need this little me time inside yourself especially when you are home all day with 4 kids and homeschooling them... Can I get a Amen Madea?!    O yes, I get that someone may call the PO, PO over here if mama don't get a little quiet time in her head sometimes... LOL
  So anyway, I have taken to redoing the house into a more of a farmhouse style instead of rustic because for 1. it actually is a farmhouse and second because I just really like the style.  So good enough, I found a old coffee table that someone was going to through away.... AHHHH did you hear the angels sing... FREE love those 4 little letters! I had to do some wood working on it cause it was in pretty bad shape, but once I put my little touches to it I was very tickled at how it turned out.

This is the table when I first got it.  It was missing a drawer on one side, had these little shell looking things that I didn't like and it needed a good sanding.

So I just did a rough coat sanding, nothing major.

With a little hand sander.

Next I popped off the shells, they were attached with nails from a nail gun, this took like two seconds.  Then I sanded where they were so stains wouldn't show through.  I had left over Plywood from my shiplap wall... (I'm telling you, this stuff is awesome..if you are the least bit crafty you will use every inch of this stuff and not waste a bit!  I decided I wanted to cover the hole where the drawer was but wanted it to look like that on each side.  Now the plywood is sharpe on the edges and I wanted it to look soft like a real drawer, so I used the little dremel tool and sanded down the edges so it would look real... then I stained them grey and attached them with a nail gun.  

I did this on both sides.

I wanted the black distress to show through the top and since I was out of black spray flat I used some old black chalk board paint from my sons room, cause I didn't need much.  

Then I painted over that with gray paint from my bedroom. lol, I said it was cheap, and I already had all this stuff at the house.  

Once all the grey and white white was painted I used a soft sandpaper and distressed it in the areas that I liked... I also took a soft rag and coated with boiled linseed oil to give it a protective coat. 

 Next I went to Hobby Lobby and purchased some cute knobs that were 50 percent off which was 2.50 a piece to make them look like real drawers, used my husbands drill and made little holes for these.  I thought it was a cute final touch!

I was tickled with how it turned out.  My coffee table that was 5 bucks!!

DISTRESSED COFFEE TABLE

Happy Weekend Everyone!

So I have finally caught up on a lot of projects that I've been doing around the house so I'm planing to make a couple of post here in the next few days to show what all we have been working on.  

I'm trying to redo a lot in my house to go to the white, gray, farmhouse style.  I had somewhat the farmhouse style already, but was with more of the reds, greens and hickory style type furniture.  So I've been making slip covers, redoing furniture, and adding that ship lap look.  

This coffee table that I purchased was at a consignment shop in Greensboro for 66.00.  I wanted it to have that distressed look.  So I am using the same bucket of flat white paint, a can of black flat paint that you can get at Lowes for .99 and some boiled linseed that my husband already had in his shop....  

This is the table when I first purchased it.

It was a little somewhat scuffed up because it had been used. 

The first thing I did was sand it.  I used my husband hand sander and used a pretty rough grade sand paper because it needed to get the shinny coat on top off. 

This sand paper is really rough and it won't take near as long to sand it down and get that top coat off. 

 Next I painted the entire table white with the basic house flat paint. 

I was doing this late in the evening, I'm also redoing a rocker you can see in this picture but that post will come later.  Anyways, I let this table dry over night, but if you did it first thing in the am you could easily finish this project in a day.  

Next I re sanded again, to make the distressed look.  I sanded most of the white off the top but left the sides exactly how I wanted them to look 

These are much softer types of sand paper and was some my husband already had in his shop so if you had to purchase these it would probably add a little extra cost to the project, say around 5 to 7 dollars.  But I used this to do the sides so it would look distressed. 

I was gonna leave the top like this to continue on the project, and you can if you like it, but we really wanted to it show some character with dents and scratches so I went back sanded more of the white off and then took a chain and large hammer and we just laid it on the table and hit it hard to make dents all in the table. 

This is my sweet husband helping me with this part, it wasn't hard, but I think he just likes to hit stuff! LoL

Once the dents and bangs are made, you use the black flat paint to spray lightly over the dents.  

Next sand the black spots to where only the paint in the dent is left behind, unfortunately I don't have a picture of this because my husband grabbed the sander an did it before I could think to take the picture.  But this is the close up of some of the dents.

Ok, so once you have the black in a few places, your back to painting the white flat all over again.  After you do this you sand with the same softer paper on the places that you would like to make it look distressed!

I wanted to give the table a little protection but didn't want to use a strong polyurethane because I didn't want a shiny look to the table, so we used boiled linseed to go over it to protect it from water. 

I just used a old wash cloth and applied this all over the top of the table.  

I also made the little tray in the table but that's another post!

EASY TO DO DISTRESSED PLANK WALL

At first I had no idea what to insert today for my post because I'm so far behind on putting stuff in that its unreal.  I have finished about 5 or 6 projects and taken pictures along the way but have been tired and haven't even known where to begin on which one I wanted to post.

So, I'm going with my Plank Wall Project.  For this project I can actually say and be very honest that it was pretty easy.  I am all about easy, as you can see from previous post.  I want to post projects that are easy so that others will be encouraged to feel like once I have taken a chance and flubbed through something that if I can make it so can anyone else!!

If you can use a tape measure, push a button, use a paint brush and bend over you are good to go!!! No, seriously that is all it takes.   Now I did have to borrow some tools from my husband and daddy to complete this project but if you have someone around that has a couple of tools, then you can do this.  Tools needed: a large round circular saw to make even cuts, a nail gun, paint brushes, tape measure, level,petroleum jelly. stain, white paint, and a pencil.  

This wall that I finished has a little special meaning behind it.  I had decided after looking through many pinterest boards that I could accomplish this project, told the hubs what I wanted to do, so I went to Lowes with him to pick out some other things for a "Fixer Upper" project we did(I will have those pictures in another post), picked out the other items but while I was there I checked out all kinds of plywood boards, all kinds and prices.  They range anywhere from 20$ for a 4 x 8 board up to 60$ a board depending on what kind of wood you want.  Well, I'm trying to keep my expense down, so I decided I wanted to wait and think over this thing and check with  my dad(the farmer) to see if we had anything laying around on the farm to use, because I love to reuse, recycle if you know what I mean.  So we left went bout our day and come home.  After coming in and staring at my wall I felt bummed because I wanted to do the project but didn't want to spend like any more than 50 cause I knew I wanted to be able to go to the almighty Hobby Lobby to get some desk decor later.

Well, I decided to take all the decor I had in there down, putty up the holes and just basically prepare the room for changes.  Especially since I didn't know what I was gonna do about the boards. I decided what ever I did that I didn't want to keep the red, so I went ahead and painted the office with some old grey paint that I had from another project so I still haven't had to spend any money. 

So, after deep thought I decided I was gonna go to Lowes to purchase the boards.  Right as I'm getting my pocket book to leave my dad calls and says he and my son Jonah was bringing me something from the farm. I said well I'm headed to Lowes and he says well hang tight there before you leave cause I'm turning in.  He brings me this huge, I mean huge box from where he had bought a combine auger 3 years ago before my Grandfather(the other farmer) passed away.  This was so cool because my grandfather would be really proud to know that I was able to use the box.  

 This is them coming in to greet my other son Isaiah and they are wrestling cause that's what they do.

Then below is the large, like I said, large box that he had and wanted to know if I could use it? What???? Can I use it......???   Like God is So So good!, No purchasing wood now (that comes later on the next plank wall, LOL)

So now all I have to do is take the cotton picking thing apart.  So we do, we get a crow bar, and hammers and saw and start taking the box apart. (Now this was not Easy, it is much, much easier to go to Lowes buy the big board and have the cutter at the back of the store to cut it into planks that makes nice and even boards. But I didn't do this for this particular project but I do on one that I will post later if you don't have old wood laying around. 

Ok, so once I had the pieces apart and ready for the circular saw, I brought them in one at a time and placed them in the floor to use a tape measure on.  Once I cut my pieces with the saw, I begin nailing them all up with the nail gun.  Now, if you have a stud finder this would be a good time to use one.  I don't use one, I use the old knock on the wall trick and if it sounds hollow I keep going till I hear a stud. But a stud finder will work great if u don't know how to do this. 

So once I was able to use the nail gun and slam all those babies to the wall it looks a little something like this. 

 As you can see from the first picture, I fixed the first one to the wall but before I kept going I did take a level and hold it on top of the plank to make sure it was level.

You can actually leave the wood as it is, or you can stain it dark, but I chose to use stain and white paint because I wanted that farmhouse white style. The first thing I did once I got all the boards nailed was to use a little bit of wood filler on the wholes that were really large, I didn't want to cover up them all cause I wanted that old barn effect. 

First I applied some Classic Grey Stain left from my pallet wall project and decided I wanted to have the lines in the planks to show through to give it the distressed look.

Once you paint the stain with a old brush be prepared to have paper towel in the other hand to wipe it down cause it will run a bit.  

The next part is actually kinda funny.  After reading many blogs and DIY sites on how to do this most of them said you needed to use a Vaseline in the creases over the stain so once you paint the boards and sand them the stain will show through.  Believe me it is much easier to sand the places you want to have it show through if you use some kind of petroleum jelly substance.  I on the other hand couldn't find the Vaseline but with having 6 people in the house there had to something else that I could use without having to run to the store to get some.  So I used Preparation H.  Yes folks, that stuff works wonders and has many, many uses.....Who knew? But guess what it did the trick.  This is how I applied it. 

Once I had all the seams jellied up with the booty cream, I used a flat white paint for the wall.  Now you could probably use any old white paint even trim paint, but I already had a gallon of flat white paint left over from the house.  I painted the entire wall and let it dry for a hour.  

Once I felt like it was good and dry I went back and lightly sanded with a piece of old sand paper in the areas I wanted the grey stain to stick through.  

I really was please with how it was turning out!

I let all the work sit over night and cleaned it up the next day so I could add some of the decorations I had found and put together.  

My metal shelf, sign and metal basket came from Hobby Lobby.  The old frame with metal chicken wire was found in a old house we bought, I just cleaned it up and repaired the nail in it and stuck some magnets on it to hold notes or pictures.  Here is a extra picture:

Now I was able to do this entire project for  around 75.00 because the only expense I had was the decoration! So if you have this kinda stuff at your home you could do it for even less! Let me know what you think!